KNight's Custom Commander Adventure

Discussion in 'Backers Lounge (Read-only)' started by KNight, March 10, 2014.

  1. KNight

    KNight Post Master General

    Messages:
    7,681
    Likes Received:
    3,268
    Well TV broke everything really, it was pretty indescriminate, caused issues for a bunch of our units, not just the Basilisk.

    For design stuff, I recommend reading through the thread if you haven't yet, I explain a lot of stuff along the way.

    I'm not sure what you mean by "straight", the shoulders are pitched upwards while the head is slightly pitched down.

    I touched on this early in the thread, in short the whole process was extremely stream lined because of the over 100 commanders being done for backers and Uber are really sticking to it, even to the detriment of the Alpha and Theta concepts IMO.

    Mike
  2. KNight

    KNight Post Master General

    Messages:
    7,681
    Likes Received:
    3,268
    Took a night off but diving right back into it this morning;

    [​IMG]

    -Got a proper Gun arm now
    -Tried the suggestions from Teod for the legs
    -Swapped the Blue and Light Gray on the Shield
    -Messed around with the Upper Arm Coloring a bit

    All in all I'm liking it, but the shields might need to go back to what they were, as they are above they have the same "layout" as the Gun/Lathe Arms which feels a bit awkward.

    Mike
    cdrkf likes this.
  3. emraldis

    emraldis Post Master General

    Messages:
    2,641
    Likes Received:
    1,843
    I don't know, the shields look pretty cool IMO..., but the other way around looks good too.
  4. KNight

    KNight Post Master General

    Messages:
    7,681
    Likes Received:
    3,268
    Well yeah, in isolation either one looks fine really, but it's all about the big picture!

    Mike
  5. cdrkf

    cdrkf Post Master General

    Messages:
    5,721
    Likes Received:
    4,793
    Any chance of a full AO render of the latest version?
  6. emraldis

    emraldis Post Master General

    Messages:
    2,641
    Likes Received:
    1,843
    I mean in this case, of course.
  7. KNight

    KNight Post Master General

    Messages:
    7,681
    Likes Received:
    3,268
    Probably not, it would take a bunch of re-remembering/re-learning to combine the two AND it wouldn't really matter that much because of course nothing is final and I'd rather focus on getting the files to Uber frankly.

    Mike
  8. cdrkf

    cdrkf Post Master General

    Messages:
    5,721
    Likes Received:
    4,793
    Ah ok, no worries! I must admit having done rendering of cad models allot I assumed it was a simple matter of ticking a box in the rendering software.... if it's allot of work then obviously you have more important things to be doing. Looking good btw!
  9. Teod

    Teod Well-Known Member

    Messages:
    483
    Likes Received:
    268
    To be honest it looks better, but not as good as I thought it would be. I guess a little bit of blue on the hip wouldn't hurt. Maybe this yellow thing on the side should be blue?
    Try changing the shape of the yellow part. Maybe it should be geometrical shape or pattern, or a symbol, or a stripe off-center through the whole plate. Stripe would be nice.
  10. KNight

    KNight Post Master General

    Messages:
    7,681
    Likes Received:
    3,268
    [​IMG]
    [​IMG]

    Most of the things that went down are on the shields, Swapped the Blue and Light Gray back and messed around with a couple of ideas for the secondary and some minor tweaks here and there.

    In the end thought, I think this has progressed far enough to submit to Uber, it was only ever going to be a guide/suggestion anyway so no real point over-investing into something I can't do as well as the guys at Uber right? So I'm gonna spend the rest of the night setting up the overall package for Uber and with some luck it won't be too long of a wait to get it in game!

    Mike
    corteks, Devak, mrscience and 8 others like this.
  11. Neumeusis

    Neumeusis Active Member

    Messages:
    344
    Likes Received:
    97
    Very interesting to share the process with us KNight, thanks !
  12. brandonpotter

    brandonpotter Well-Known Member

    Messages:
    966
    Likes Received:
    389
    Wooooow, Id definitely buy that :)
  13. Degraine

    Degraine New Member

    Messages:
    17
    Likes Received:
    0
    A very interesting read on the development of your own custom. Thanks for sharing this.
  14. zurginator

    zurginator Member

    Messages:
    92
    Likes Received:
    19
    I had a quick idea for where to stick the secondary color, so I figured I'd do a quick and ugly paint-over in case you're interested:
    [​IMG]
    planktum and chronosoul like this.
  15. KNight

    KNight Post Master General

    Messages:
    7,681
    Likes Received:
    3,268

    Mike
  16. vorell255

    vorell255 Active Member

    Messages:
    492
    Likes Received:
    190
    When will this guy be done? I want to check him out already ;).
  17. KNight

    KNight Post Master General

    Messages:
    7,681
    Likes Received:
    3,268
    Well it's in Uber's hands right now I haven't heard anything back yet so I'm assuming that either they haven't started on it yet(I don't have higher priority than anyone else so I just get slotted into the queue) or they have started it and just haven't had any issues with it yet and they haven't reached a point where my input is required yet.

    Mike
  18. MrTBSC

    MrTBSC Post Master General

    Messages:
    4,857
    Likes Received:
    1,823

    hmmmm could have bit more in the torso and leg area imo ... may be a bit on the spine too?

    forget it: watched the pictures above to late ...
    Last edited: June 17, 2014
  19. brandonpotter

    brandonpotter Well-Known Member

    Messages:
    966
    Likes Received:
    389
    Come on Uber! Get this commander into the armoury XD
  20. KNight

    KNight Post Master General

    Messages:
    7,681
    Likes Received:
    3,268
    Calm down, they have the Files, they'll get to it when it comes up.

    Mike

Share This Page